All Parts > Integrated Circuits (ICs) > Logic ICs > Texas-Instruments-SN74ABT652ANSR

Texas Instruments SN74ABT652ANSR

Texas Instruments

Part Number:	Texas Instruments SN74ABT652ANSR
Manufacturer:	Texas Instruments
Part Type:	All Parts > Integrated Circuits (ICs) > Logic ICs > Texas-Instruments-SN74ABT652ANSR
Qty Available:
Description:	Registered Bus Transceiver, ABT Series, 1-Func, 8-Bit, True Output, BICMOS, PDSO24

Get Quote

04/25/2026 – There are 515 pieces pieces of Part Number Texas Instruments SN74ABT652ANSR Available.

PCX has Texas Instruments All Parts > Integrated Circuits (ICs) > Logic ICs > Texas-Instruments-SN74ABT652ANSR Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Registered Bus Transceiver, ABT Series, 1-Func, 8-Bit, True Output, BICMOS, PDSO24

Alternate Descriptions

Descriptions of Texas Instruments SN74ABT652ANSR provided by its distributors.
Registered Bus Transceiver, ABT Series, 1-Func, 8-Bit, True Output, BICMOS, PDSO24
IC TRANSCVR NON-INVERT 5.5V 24SO
These devices consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OEAB and OEBA\) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select either real-time or stored data for transfer. The circuitry used for select control eliminates the typical decoding glitch that occurs in a multiplexer during the transition between stored and real-time data. A low input selects real-time data, and a high input selects stored data. Figure 1 illustrates the four fundamental bus-management functions that can be performed with the 'ABT652A. Data on the A- or B-data bus, or both, can be stored in the internal D-type flip-flops by low-to-high transitions at the appropriate clock (CLKAB or CLKBA) inputs, regardless of the select- or enable-control inputs. When SAB and SBA are in the real-time transfer mode, it is possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA\. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last state. To ensure the high-impedance state during power up or power down, OEBA\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver (B to A). OEAB should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver (A to B). The SN54ABT652A is characterized for operation over the full military temperature range of -55C to 125C. The SN74ABT652A is characterized for operation from -40C to 85C.

Texas Instruments SN74ABT652ANSR

Texas Instruments

Alternate Descriptions

Title

FAQ’s

What is the part number of the product?

What is the function of this product?

What is the package type of this product?

What is the maximum operating temperature for this product?

Electronic Component Search