Integrated Circuits (ICs) > Logic ICs > Logic Gates > SN74HC652NT

SN74HC652NT

Texas Instruments

Part Number:	SN74HC652NT
Manufacturer:	Texas Instruments
Part Type:	Integrated Circuits (ICs) > Logic ICs > Logic Gates > SN74HC652NT
Qty Available:
Description:	Registered Bus Transceiver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP24

Get Quote

04/28/2026 – There are 515 pieces pieces of Part Number SN74HC652NT Available.

PCX has Texas Instruments Integrated Circuits (ICs) > Logic ICs > Logic Gates > SN74HC652NT Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Registered Bus Transceiver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP24

Specifications

TYPE	DESCRIPTION
Case/Package	PDIP
Mount	Through Hole
Number of Pins	24
Weight	1.753503 g
Direction	Bidirectional
High Level Output Current	-7.8 mA
Logic Function	Inverting, Transceiver
Low Level Output Current	7.8 mA
Max Operating Temperature	85 °C
Max Supply Voltage	6 V
Min Operating Temperature	-40 °C
Min Supply Voltage	2 V
Number of Bits	8
Number of Bits per Element	8
Number of Channels	8
Number of Circuits	8
Number of Elements	1
Number of Outputs	8
Operating Supply Voltage	5 V
Polarity	Non-Inverting
Propagation Delay	265 ns
Termination	Through Hole
Turn-On Delay Time	410 ns
Height	4.57 mm
Length	31.64 mm
Width	6.73 mm
Case/Package	PDIP
Mount	Through Hole
Number of Pins	24
Weight	1.753503 g
Direction	Bidirectional
High Level Output Current	-7.8 mA
Logic Function	Inverting, Transceiver
Low Level Output Current	7.8 mA
Max Operating Temperature	85 °C
Max Supply Voltage	6 V
Min Operating Temperature	-40 °C
Min Supply Voltage	2 V
Number of Bits	8
Number of Bits per Element	8
Number of Channels	8
Number of Circuits	8
Number of Elements	1
Number of Outputs	8
Operating Supply Voltage	5 V
Polarity	Non-Inverting
Propagation Delay	265 ns
Termination	Through Hole
Turn-On Delay Time	410 ns
Height	4.57 mm
Length	31.64 mm
Width	6.73 mm

Images

Documentation for Texas Instruments SN74HC652NT

Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet
Datasheet	View & Download SN74HC652NT Datasheet

Alternate Descriptions

Descriptions of Texas Instruments SN74HC652NT provided by its distributors.
Registered Bus Transceiver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP24
LOGIC, BUS TRANSCVR OCTAL, 24DIP; Logic Device Type:Transceiver, Non Inverting; Supply Voltage Range:2V to 6V; Logic Case Style:DIP; No. of Pins:24; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (20-Jun-2011); Logic Function Number:74652; Logic IC Base Number:74652; Logic IC Family:HC; Logic IC Function:Octal Bus Transceiver / Register with 3-State Outputs; Package / Case:PDIP; Supply Voltage Max:6V; Supply Voltage Min:2V; Termination Type:Through Hole
The HC652 devices consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OEAB and OEBA\) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select real-time or stored data transfer. A low input level selects real-time data, and a high input level selects stored data. Figure 1 illustrates the four fundamental bus-management functions that can be performed with these devices. Data on the A or B data bus, or both, can be stored in the internal D-type flip-flops by low-to-high transitions at the appropriate clock (CLKAB or CLKBA) terminals, regardless of the select- or output-control terminals. When SAB and SBA are in the real-time transfer mode, it is possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA\. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last state. To ensure the high-impedance state during power up or power down, OEBA\ should be tied to VCC through a pullup resistor, and OEAB should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.
Descriptions of Texas Instruments SN74HC652NT provided by its distributors.
Registered Bus Transceiver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDIP24
LOGIC, BUS TRANSCVR OCTAL, 24DIP; Logic Device Type:Transceiver, Non Inverting; Supply Voltage Range:2V to 6V; Logic Case Style:DIP; No. of Pins:24; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (20-Jun-2011); Logic Function Number:74652; Logic IC Base Number:74652; Logic IC Family:HC; Logic IC Function:Octal Bus Transceiver / Register with 3-State Outputs; Package / Case:PDIP; Supply Voltage Max:6V; Supply Voltage Min:2V; Termination Type:Through Hole
The HC652 devices consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OEAB and OEBA\) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select real-time or stored data transfer. A low input level selects real-time data, and a high input level selects stored data. Figure 1 illustrates the four fundamental bus-management functions that can be performed with these devices. Data on the A or B data bus, or both, can be stored in the internal D-type flip-flops by low-to-high transitions at the appropriate clock (CLKAB or CLKBA) terminals, regardless of the select- or output-control terminals. When SAB and SBA are in the real-time transfer mode, it is possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA\. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last state. To ensure the high-impedance state during power up or power down, OEBA\ should be tied to VCC through a pullup resistor, and OEAB should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.

SN74HC652NT

Texas Instruments

Specifications

Images

Documentation for Texas Instruments SN74HC652NT

Alternate Descriptions

Title

FAQ’s

What is the brand of the product?

What is the part number of the product?

What is the package type of the product?

What is the logic function of the product?

What is the part number of the product?

What is the brand of the product?

What is the logic function of the product?

What is the package type of the product?

Electronic Component Search