Integrated Circuits (ICs) > Logic ICs > Counters > SN74ALS867ADWRG4

SN74ALS867ADWRG4

Texas Instruments

Part Number:	SN74ALS867ADWRG4
Manufacturer:	Texas Instruments
Part Type:	Integrated Circuits (ICs) > Logic ICs > Counters > SN74ALS867ADWRG4
Qty Available:
Description:	Als Series Syn Positive Edge Triggered 8-BIT Bidirectional Binary Counter PDSO24

Get Quote

04/22/2026 – There are 515 pieces pieces of Part Number SN74ALS867ADWRG4 Available.

PCX has Texas Instruments Integrated Circuits (ICs) > Logic ICs > Counters > SN74ALS867ADWRG4 Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Als Series Syn Positive Edge Triggered 8-BIT Bidirectional Binary Counter PDSO24

Specifications

TYPE	DESCRIPTION
Case/Package	SOIC
Mount	Surface Mount
Number of Pins	24
Clock Edge Trigger Type	Positive Edge
Frequency	35 MHz
Logic Function	Counter
Max Operating Temperature	70 °C
Min Operating Temperature	0 °C
Number of Bits	8
Number of Bits per Element	8
Number of Elements	1
Operating Supply Voltage	5.5 V
Packaging	Tape & Reel (TR)
Reset	Asynchronous
Sync/Async	Synchronous

Documentation for Texas Instruments SN74ALS867ADWRG4

Datasheet

View & Download SN74ALS867ADWRG4 Datasheet

Alternate Descriptions

Descriptions of Texas Instruments SN74ALS867ADWRG4 provided by its distributors.
ALS SERIES SYN POSITIVE EDGE TRIGGERED 8-BIT BIDIRECTIONAL BINARY COUNTER PDSO24
Counter Logic IC; Logic Family:ALS; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Package/Case:24-SOIC; No. of Pins:24; Operating Temperature Range:0°C to +70°C; Input Type:TTL; Leaded Process Compatible:Yes; Output Type:TTL ;RoHS Compliant: Yes
These synchronous, presettable, 8-bit up/down counters feature internal-carry look-ahead circuitry for cascading in high-speed counting applications. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincidentally with each other when so instructed by the count-enable (,) inputs and internal gating. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters. A buffered clock (CLK) input triggers the eight flip-flops on the rising (positive-going) edge of the clock waveform. These counters are fully programmable; they may be preset to any number between 0 and 255. The load-input circuitry allows parallel loading of the cascaded counters. Because loading is synchronous, selecting the load mode disables the counter and causes the outputs to agree with the data inputs after the next clock pulse. The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. Two count-enable (and ) inputs and a ripple-carry () output are instrumental in accomplishing this function. Both and must be low to count. The direction of the count is determined by the levels of the select (S0, S1) inputs as shown in the function table. is fed forward to enable . thus enabled produces a low-level pulse while the count is zero (all outputs low) counting down or 255 counting up (all outputs high). This low-level overflow-carry pulse can be used to enable successive cascaded stages. Transitions at and are allowed regardless of the level of CLK. All inputs are diode clamped to minimize transmission-line effects, thereby simplifying system design. These counters feature a fully independent clock circuit. With the exception of the asynchronous clear on the SN74ALS867A and ´AS867, changes at S0 and S1 that modify the operating mode have no effect on the Q outputs until clocking occurs. For the ´AS867 and ´AS869, any time ENP\ and/or ENT\ is taken high, either goes or remains high. For the SN74ALS867A and SN74ALS869, any time is taken high, either goes or remains high. The function of the counter (whether enabled, disabled, loading, or counting) is dictated solely by the conditions meeting the stable setup and hold times. The SN54AS867 and SN54AS869 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS867A, SN74ALS869, SN74AS867, and SN74AS869 are characterized for operation from 0°C to 70°C.

SN74ALS867ADWRG4

Texas Instruments

Specifications

Documentation for Texas Instruments SN74ALS867ADWRG4

Alternate Descriptions

Title

FAQ’s

What is the brand of the product?

What is the part number of the product?

What is the function of the product?

What is the package type of the product?

Electronic Component Search