Integrated Circuits (ICs) > Logic ICs > Buffers, Drivers and Transceivers > SN74ABTH162460DL

SN74ABTH162460DL

Texas Instruments

Part Number:	SN74ABTH162460DL
Manufacturer:	Texas Instruments
Part Type:	Integrated Circuits (ICs) > Logic ICs > Buffers, Drivers and Transceivers > SN74ABTH162460DL
Qty Available:
Description:	Bus Exchanger, ABT Series, 1-Func, 4-Bit, True Output, BICMOS, PDSO56

Get Quote

04/24/2026 – There are 515 pieces pieces of Part Number SN74ABTH162460DL Available.

PCX has Texas Instruments Integrated Circuits (ICs) > Logic ICs > Buffers, Drivers and Transceivers > SN74ABTH162460DL Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Bus Exchanger, ABT Series, 1-Func, 4-Bit, True Output, BICMOS, PDSO56

Specifications

TYPE	DESCRIPTION
Case/Package	SSOP
Mount	Surface Mount
Number of Pins	56
High Level Output Current	64 mA
Independent Circuits	1
Logic Function	Transceiver
Low Level Output Current	32 mA
Max Operating Temperature	85 °C
Max Supply Voltage	5.5 V
Min Operating Temperature	-40 °C
Min Supply Voltage	4.5 V
Number of Channels	4
Number of Circuits	1
Number of Elements	1
Operating Supply Voltage	5 V
Packaging	Rail/Tube
Polarity	Non-Inverting
Propagation Delay	6.9 ns
Quiescent Current	18 mA
Supply Type	Single
Turn-On Delay Time	7.7 ns

Images

Documentation for Texas Instruments SN74ABTH162460DL

Datasheet	View & Download SN74ABTH162460DL Datasheet
Datasheet	View & Download SN74ABTH162460DL Datasheet

Alternate Descriptions

Descriptions of Texas Instruments SN74ABTH162460DL provided by its distributors.
Bus Exchanger, ABT Series, 1-Func, 4-Bit, True Output, BICMOS, PDSO56
IC REGISTERED TRANSCVR 56SSOP
IC MUX/DEMUX 1 X 4:1 56SSOP
Contact for details
The 'ABTH162460 are 4-bit to 1-bit multiplexed registered transceivers used in applications where four separate data paths must be multiplexed onto or demultiplexed from a single data path. Typical applications include multiplexing and/or demultiplexing of address and data information in microprocessor or bus-interface applications. This device also is useful in memory-interleaving applications. Five 4-bit I/O ports (1A-4A, 1B1-4, 2B1-4, 3B1-4, and 4B1-4) are available for address and/or data transfer. The output-enable (OEB\, OEB1\-OEB4\, and OEA\) inputs control the bus-transceiver functions. These control signals also allow 4-bit or 16-bit control, depending on the OEB\ level. Address and/or data information can be stored using the internal storage latches/flip-flops. The latch-enable (LEB1-LEB4, LEBA, and LEAB1-LEAB4) and clock/clock-enable (CLK/CLKEN\) inputs are used to control data storage. When either one of the latch-enable inputs is high, the latch is transparent (clock is a don't care as long as the latch enable is high). When the latch-enable input goes low (providing that the clock does not transit from low to high), the data present at the inputs is latched and remains latched until the latch-enable input is returned high. When the clock enable is low and the corresponding latch enable is low, data can be clocked on the low-to-high transition of the clock. When either the clock enable or the corresponding latch enable is high, the clock is a don't care. Four select (SEL0, SEL1, CE_SEL0, and CE_SEL1) pins are provided to multiplex data (A port), or to select one of four clock enables (B port). This allows the user the flexibility of controlling one bit at a time. The B-port outputs, which are designed to sink up to 12 mA, include equivalent 25- series resistors to reduce overshoot and undershoot. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABTH162460 is characterized for operation over the full military temperature range of -55C to 125C. The SN74ABTH162460 is characterized for operation from -40C to 85C.

SN74ABTH162460DL

Texas Instruments

Specifications

Images

Documentation for Texas Instruments SN74ABTH162460DL

Alternate Descriptions

Title

FAQ’s

What is the product name and brand?

What category does this product belong to?

What is the function of this product?

What is the price of this product?

Electronic Component Search