Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > OP213FS-REEL7

OP213FS-REEL7

Analog Devices

Part Number:	OP213FS-REEL7
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > OP213FS-REEL7
Qty Available:
Description:	IC, Operational Amplifier, Dual, Bipolar/mos, Sop, 8PIN, Plastic

Get Quote

04/23/2026 – There are 515 pieces pieces of Part Number OP213FS-REEL7 Available.

PCX has Analog Devices Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > OP213FS-REEL7 Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

IC, Operational Amplifier, Dual, Bipolar/mos, Sop, 8PIN, Plastic

Specifications

TYPE	DESCRIPTION
Case/Package	SOIC
Mount	Surface Mount
Number of Pins	8
Common Mode Rejection Ratio	96 dB
Dual Supply Voltage	15 V
Gain Bandwidth Product	3.4 MHz
Input Bias Current	240 nA
Input Offset Voltage (Vos)	100 µV
Input Voltage Noise Density	9 nV/sqrt Hz
Max Dual Supply Voltage	18 V
Max Operating Temperature	85 °C
Max Supply Voltage	36 V
Min Dual Supply Voltage	2 V
Min Operating Temperature	-40 °C
Min Supply Voltage	4 V
Number of Channels	2
Number of Circuits	2
Number of Elements	2
Operating Supply Current	6 mA
Operating Supply Voltage	5 V
Output Current per Channel	40 mA
Packaging	Tape and Reel
Power Supply Rejection Ratio (PSRR)	100 dB
Quiescent Current	3 mA
Settling Time	9 µs
Slew Rate	1.2 V/µs
Voltage Gain	126.02 dB

Images

Documentation for Analog Devices OP213FS-REEL7

Datasheet	View & Download OP213FS-REEL7 Datasheet
Datasheet	View & Download OP213FS-REEL7 Datasheet
Datasheet	View & Download OP213FS-REEL7 Datasheet

Alternate Descriptions

Descriptions of Analog Devices OP213FS-REEL7 provided by its distributors.
IC, Operational Amplifier, Dual, Bipolar/mos, Sop, 8PIN, Plastic
Operational Amplifier, 2 Func, 2000uV Offset-Max
OP Amp Dual GP ±18V/36V 8-Pin SOIC N T/R
Precision Amplifiers Low Noise Low Drift SGL-Supply
The OPx13 family of single-supply operational amplifiers features both low noise and drift. It has been designed for systems with internal calibration. Often these processor-based systems are capable of calibrating corrections for offset and gain, but they cannot correct for temperature drifts and noise. Optimized for these parameters, the OPx13 family can be used to take advantage of superior analog performance combined with digital correction. Many systems using internal calibration operate from unipolar supplies, usually either 5 V or 12 V. The OPx13 family is designed to operate from single supplies from 4 V to 36 V and to maintain its low noise and precision performance. The OPx13 family is unity gain stable and has a typical gain bandwidth product of 3.4 MHz. Slew rate is in excess of 1 V/μs. Noise density is a very low 4.7 nV/√Hz, and noise in the 0.1 Hz to 10 Hz band is 120 nV p-p. Input offset voltage is guaranteed and offset drift is guaranteed to be less than 0.8 μV/°C. Input common-mode range includes the negative supply and to within 1 V of the positive supply over the full supply range. Phase reversal protection is designed into the OPx13 family for cases where input voltage range is exceeded. Output voltage swings also include the negative supply and go to within 1 V of the positive rail. The output is capable of sinking and sourcing current throughout its range and is specified with 600 Ω loads. Digital scales and other strain gage applications benefit from the very low noise and low drift of the OPx13 family. Other applications include use as a buffer or amplifier for both analog-to-digital (ADC) and digital-to-analog (DAC) sigma-delta converters. Often these converters have high resolutions requiring the lowest noise amplifier to utilize their full potential. Many of these converters operate in either single-supply or low-supply voltage systems, and attaining the greater signal swing possible increases system performance. The OPx13 family is specified for single 5 V and dual ±15 V operation over the XIND—extended industrial temperature range (–40°C to +85°C). They are available in PDIP and SOIC surface-mount packages. Applications Digital scales Multimedia Strain gages Battery-powered instrumentation Temperature transducer amplifier

OP213FS-REEL7

Analog Devices

Specifications

Images

Documentation for Analog Devices OP213FS-REEL7

Alternate Descriptions

Title

FAQ’s

What is the part number of the product?

What is the package type of the product?

What is the number of pins in the product?

What is the gain bandwidth product of the product?

Electronic Component Search