Integrated Circuits (ICs) > Power Management ICs > Hot Swap Controllers > FPF2700MPX

FPF2700MPX

onsemi

Part Number:	FPF2700MPX
Manufacturer:	onsemi
Part Type:	Integrated Circuits (ICs) > Power Management ICs > Hot Swap Controllers > FPF2700MPX
Qty Available:
Description:	Current Limit SW 1-IN 1-OUT 2.8V to 36V 0.4A to 2A 8-Pin MLP EP T/R

Get Quote

04/23/2026 – There are 515 pieces pieces of Part Number FPF2700MPX Available.

PCX has onsemi Integrated Circuits (ICs) > Power Management ICs > Hot Swap Controllers > FPF2700MPX Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Current Limit SW 1-IN 1-OUT 2.8V to 36V 0.4A to 2A 8-Pin MLP EP T/R

Specifications

TYPE	DESCRIPTION
Contact Plating	Gold
Mount	Surface Mount
Number of Pins	8
Weight	151 mg
Ambient Temperature Range High	85 °C
Fault Protection	Over Temperature
Interface	On/Off
Max Input Voltage	36 V
Max Junction Temperature (Tj)	125 °C
Max Operating Temperature	85 °C
Max Output Current	2 A
Max Power Dissipation	1.25 W
Max Supply Voltage	36 V
Min Input Voltage	2.8 V
Min Operating Temperature	-40 °C
Min Supply Voltage	2.8 V
Nominal Input Voltage	36 V
Nominal Supply Current	92 µA
Number of Inputs	1
Number of Outputs	1
Operating Supply Voltage	36 V
Output Configuration	High Side
Output Current	2 A
Packaging	Cut Tape
Resistance	88 mΩ
Schedule B	8542390000
Height	750 µm
Length	3 mm
Width	3 mm

Images

Documentation for onsemi FPF2700MPX

Datasheet	View & Download FPF2700MPX Datasheet
Technical Drawing	View & Download FPF2700MPX Technical Drawing
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Technical Drawing	View & Download FPF2700MPX Technical Drawing
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet
Datasheet	View & Download FPF2700MPX Datasheet

Alternate Descriptions

Descriptions of onsemi FPF2700MPX provided by its distributors.
Current Limit SW 1-IN 1-OUT 2.8V to 36V 0.4A to 2A 8-Pin MLP EP T/R
Tape & Reel (TR) FPF2700 Current Limiting (Adjustable) Over Temperature UVLO e4 power distribution switch 3mm 36V 2A 1.25W
SWITCH, LOAD, 0.4-2.0A, 8MLP; Input Voltage:36V; Current Limit:2A; On State Resistance:0.088ohm; Distribution Switch Case Style:MLP; No. of Pins:8; Thermal Protection:Yes; On / Enable Input Polarity:Active Low; Power Dissipation Pd:1.25W; No. of Outputs:1; Operating Temperature Range:-40°C to +125°C; MSL:MSL 1 - Unlimited; Internal Switch:Yes
Supply Voltage Min. V = 2.8 / Supply Voltage Max. V = 36 / Input Voltage V = 36 / Power Load Switch Type = High Side / Input Polarity = Positive / Output Voltage Min. mV = -300 / Output Voltage Max. V = 36.3 / Limit Current A = 2 / Control Voltage mV = 800 / Package Type = WDFN / Outputs = 1 / Pins = 8 / Mounting Type = SMD / Turn-ON Delay Time ms = 2.7 / Turn-OFF Delay Time us = 100 / Reflow Temperature Max. °C = 260 / Packaging = Tape & Reel / MSL = Level-1 / Operating Temperature Min. °C = -40 / Operating Temperature Max. °C = 85
The AccuPower™ FPF270X series is a family of current-limit load switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew-rate-controlled N-channel MOSFET and slew-rated turn-on to prevent power bus disturbances from being caused by "hot plugging" loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low-voltage logic-compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power-good pin. Each member of the FPF270X family serves a category of load-fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of excessive levels of power dissipation. FPF2700 responds to an overload condition that lasts longer than a fixed blanking period by turning off the load, followed by a retry after the auto-restart time. The FPF270X is available in a space-saving Pb and Halogen free, 8-lead MLP 3x3mm and SO8 packages.

FPF2700MPX

onsemi

Specifications

Images

Documentation for onsemi FPF2700MPX

Alternate Descriptions

Title

FAQ’s

What is the product name and description?

What is the weight and dimensions of the product?

What is the supply chain and lifecycle status of the product?

What are the compliance standards or regulations that the product meets?

Electronic Component Search