All Parts > Integrated Circuits (ICs) > Analog-Devices-AD650JP

Analog Devices AD650JP

Analog Devices

Part Number:	Analog Devices AD650JP
Manufacturer:	Analog Devices
Part Type:	All Parts > Integrated Circuits (ICs) > Analog-Devices-AD650JP
Qty Available:
Description:	Voltage to Frequency & Frequency to Voltage IC V/F CONVERTER

Get Quote

05/04/2026 – There are 515 pieces pieces of Part Number Analog Devices AD650JP Available.

PCX has Analog Devices All Parts > Integrated Circuits (ICs) > Analog-Devices-AD650JP Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Voltage to Frequency & Frequency to Voltage IC V/F CONVERTER

Images

Alternate Descriptions

Descriptions of Analog Devices AD650JP provided by its distributors.
Voltage to Frequency & Frequency to Voltage IC V/F CONVERTER
VFC/FVC Non-Sync 1MHz 20-Pin PLCC Tube
French Electronic Distributor since 1988
V/F & F/V CONVERTER 1MHZ 0.1% LCC-20
The AD650 V/F/V (voltage-to-frequency or frequency-to-voltage converter) provides a combination of high frequency operation and low nonlinearity previously unavailable in monolithic form. The inherent monotonicity of the V/F transfer function makes the AD650 useful as a high-resolution analog-to-digital converter. A flexible input configuration allows a wide variety of input voltage and current formats to be used, and an open-collector output with separate digital ground allows simple interfacing to either standard logic families or opto-couplers. The linearity error of the AD650 is typically 20 ppm (0.002% of full scale) and 50 ppm (0.005%) maximum at 10 kHz full scale. This corresponds to approximately 14-bit linearity in an analog-to-digital converter circuit. Higher full-scale frequencies or longer count intervals can be used for higher resolution conversions. The AD650 has a useful dynamic range of six decades allowing extremely high resolution measurements. Even at 1 MHz full scale, linearity is guaranteed less than 1000 ppm (0.1%) on the AD650KN, KP, BD and SD grades. In addition to analog-to-digital conversion, the AD650 can be used in isolated analog signal transmission applications, phased locked-loop circuits, and precision stepper motor speed controllers. In the F/V mode, the AD650 can be used in precision tachometer and FM demodulator circuits. The input signal range and full-scale output frequency are user-programmable with two external capacitors and one resistor. Input offset voltage can be trimmed to zero with an external potentiometer. The AD650JN and AD650KN are offered in a plastic 14-pin DIP package. The AD650JP and AD650KP are available in a 20-pin plastic leaded chip carrier (PLCC). Both plastic packaged versions of the AD650 are specified for the commercial (0°C to +70°C) temperature range. For industrial temperature range (-25°C to +85°C) applications, the AD650AD and AD650BD are offered in a ceramic package. The AD650SD is specified for the full -55°C to +125°C extended temperature range.

Analog Devices AD650JP

Analog Devices

Images

Alternate Descriptions

Title

FAQ’s

What is the product name?

What is the function of the AD650JP?

What is the frequency range of the AD650JP?

What is the temperature range for the AD650JP?

Electronic Component Search