All Parts > Integrated Circuits (ICs) > Linear ICs > Analog-Devices-5962-9457203MPA

Analog Devices 5962-9457203MPA

Analog Devices

Part Number:	Analog Devices 5962-9457203MPA
Manufacturer:	Analog Devices
Part Type:	All Parts > Integrated Circuits (ICs) > Linear ICs > Analog-Devices-5962-9457203MPA
Qty Available:
Description:	SP Amp Variable Gain Amp Single ±5.25V 8-Pin CDIP Tube

Get Quote

04/24/2026 – There are 515 pieces pieces of Part Number Analog Devices 5962-9457203MPA Available.

PCX has Analog Devices All Parts > Integrated Circuits (ICs) > Linear ICs > Analog-Devices-5962-9457203MPA Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

SP Amp Variable Gain Amp Single ±5.25V 8-Pin CDIP Tube

Images

Alternate Descriptions

Descriptions of Analog Devices 5962-9457203MPA provided by its distributors.
SP Amp Variable Gain Amp Single ±5.25V 8-Pin CDIP Tube
Special Purpose Amplifiers IC - VARIABLE GAIN AMP
IC AMP VGA 90MHZ LN 50MA 8CERDIP
IC OPAMP VGA 1 CIRCUIT 8CERDIP
IC VARIABLE GAIN 1 CIRC 8CERDIP
French Electronic Distributor since 1988
LOW NOISE, 90 MHZ VARIABLE-GAIN
The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of -11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3 nV/vHz, and power consumption is 125 mW at the recommended ±5 V supplies. The decibel gain is linear in dB, accurately calibrated, and stable over temperature and supply. The gain is controlled at a high impedance (50 MO), low bias (200 nA) differential input; the scaling is 25 mV/dB, requiring a gain control voltage of only 1 V to span the central 40 dB of the gain range. An overrange and underrange of 1 dB is provided whatever the selected range. The gain control response time is less than 1 µs for a 40 dB change. The differential gain control interface allows the use of either differential or single-ended positive or negative control voltages. Several of these amplifiers may be cascaded and their gain control gains offset to optimize the system SNR. The AD603 can drive a load impedance as low as 100 O with low distortion. For a 500 O load in shunt with 5 pF, the total harmonic distortion for a ±1 V sinusoidal output at 10 MHz is typically -60 dBc. The peak specified output is ±2.5 V minimum into a 500 O load. The AD603 uses a patented proprietary circuit topology—the X-AMP®. The X-AMP comprises a variable attenuator of 0 dB to -42.14 dB followed by a fixed-gain amplifier. Because of the attenuator, the amplifier never has to cope with large inputs and can use negative feedback to define its (fixed) gain and dynamic performance. The attenuator has an input resistance of 100 O, laser trimmed to ±3%, and comprises a 7-stage R-2R ladder network, resulting in an attenuation between tap points of 6.021 dB. A proprietary interpolation technique provides a continuous gain control function that is linear in dB. The AD603 is specified for operation from -40°C to +85°C. Applications RF/IF AGC amplifiers Video gain controls A/D range extensions Signal measurements

Analog Devices 5962-9457203MPA

Analog Devices

Images

Alternate Descriptions

Title

FAQ’s

What is the price range for this product?

What is the maximum operating temperature for this product?

Are there any alternative products available?

What is the product name and its specifications?

Electronic Component Search