Integrated Circuits (ICs) > Linear ICs > ADRF6510ACPZ-R7

ADRF6510ACPZ-R7

Analog Devices

Part Number:	ADRF6510ACPZ-R7
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Linear ICs > ADRF6510ACPZ-R7
Qty Available:
Description:	Modulator / Demodulator Dual Programmable Filters and VGA

Get Quote

04/29/2026 – There are 515 pieces pieces of Part Number ADRF6510ACPZ-R7 Available.

PCX has Analog Devices Integrated Circuits (ICs) > Linear ICs > ADRF6510ACPZ-R7 Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Modulator / Demodulator Dual Programmable Filters and VGA

Specifications

TYPE	DESCRIPTION
Case/Package	LFCSP EP
Contact Plating	Tin
Mount	Surface Mount
Number of Pins	32
-3db Bandwidth	30 MHz
Bandwidth	30 MHz
Frequency	30 MHz
Gain	50 dB
Max Operating Temperature	85 °C
Min Operating Temperature	-40 °C
Nominal Supply Current	264 mA
Number of Channels	2
Operating Supply Current	258 mA
Operating Supply Voltage	5.25 V
Packaging	Cut Tape
Schedule B	8542390000

Images

Documentation for Analog Devices ADRF6510ACPZ-R7

Datasheet

View & Download ADRF6510ACPZ-R7 Datasheet

Alternate Descriptions

Descriptions of Analog Devices ADRF6510ACPZ-R7 provided by its distributors.
Modulator / Demodulator Dual Programmable Filters and VGA
Programmable Filters and Variable Gain Amplifiers 32-Pin LFCSP EP T/R
RF Amp Dual VGA 30MHz 5.25V 32-Pin LFCSP EP T/R
Ic, Prog Gain Amp, 30Mhz, 45Db, Lfcsp-32
IC QUADRATURE MODULATOR 32LFCSP
The ADRF6510 is a matched pair of fully differential low noise and low distortion programmable filters and variable gain amplifiers (VGAs). Each channel is capable of rejecting large out-of-band interferers while reliably boosting the wanted signal, thus reducing the bandwidth and resolution requirements on the analog-to-digital converters (ADCs). The excellent matching between channels and their high spurious-free dynamic range over all gain and bandwidth settings make the ADRF6510 ideal for quadrature-based (IQ) communication systems with dense constellations, multiple carriers, and nearby interferers. The filters provide a six-pole Butterworth response with 0.5 dB corner frequencies programmable through the SPI port from 1 MHz to 30 MHz in 1 MHz steps. The preamplifier that precedes the filters offers a pin-programmable option of either 6 dB or 12 dB of gain. The preamplifier sets a differential input impedance of 400 O and has a common-mode voltage that defaults to 2.1 V but can be driven from 1.5 V to 2.5 V. The variable gain amplifiers that follow the filters provide 50 dB of continuous gain control with a slope of 30 mV/dB. The output buffers provide a differential output impedance of 20 O that is capable of driving 1.5 V p-p into 1 kO loads. The output common-mode voltage defaults to VPS/2, but it can be programmed via the VOCM pin. The built-in dc offset correction loop can be disabled if dc-coupled operation is desired. The high-pass corner frequency is defined by external capacitors on the OFS1 and OFS2 pins. The ADRF6510 operates from a 4.75 V to 5.25 V supply and consumes a maximum supply current of 258 mA when programmed to the highest bandwidth setting. When disabled, it consumes 2 mA. The ADRF6510 is fabricated in an advanced silicon-germanium BiCMOS process and is available in a 32-lead, exposed paddle LFCSP. Performance is specified over the -40°C to +85°C temperature range. Applications Baseband I/Q receivers Diversity receivers ADC drivers

Electronic Component Search

Lookup any part using a part number, manufacturer or keyword.