Integrated Circuits (ICs) > Interface ICs > RS-232 / RS-422 / RS-485 Interface ICs > ADM3310EARU

ADM3310EARU

Analog Devices

Part Number:	ADM3310EARU
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Interface ICs > RS-232 / RS-422 / RS-485 Interface ICs > ADM3310EARU
Qty Available:
Description:	Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP Tube

Get Quote

04/23/2026 – There are 515 pieces pieces of Part Number ADM3310EARU Available.

PCX has Analog Devices Integrated Circuits (ICs) > Interface ICs > RS-232 / RS-422 / RS-485 Interface ICs > ADM3310EARU Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP Tube

Specifications

TYPE	DESCRIPTION
Case/Package	TSSOP
Number of Pins	28
Data Rate	460 kbps
Logic Function	Receiver, Transceiver
Max Operating Temperature	85 °C
Max Supply Voltage	3.6 V
Min Operating Temperature	-40 °C
Min Supply Voltage	2.7 V
Nominal Supply Current	850 nA
Number of Drivers	3
Number of Receivers	5
Number of Transceivers	1
Number of Transmitters	3
Operating Supply Current	850 nA
Operating Supply Voltage	2.7 V
Packaging	Rail/Tube
Receiver Hysteresis	140 mV
Simplex/Duplex	Full Duplex

Images

Documentation for Analog Devices ADM3310EARU

Datasheet	View & Download ADM3310EARU Datasheet
Datasheet	View & Download ADM3310EARU Datasheet
Datasheet	View & Download ADM3310EARU Datasheet
Datasheet	View & Download ADM3310EARU Datasheet
Datasheet	View & Download ADM3310EARU Datasheet

Alternate Descriptions

Descriptions of Analog Devices ADM3310EARU provided by its distributors.
Triple Transmitter Quint Receiver RS-232 28-Pin TSSOP Tube
The ADM3310E is a three-driver/five-receiver serial port transceiver, which meets EIA-232 standards while operating from a single power supply as low as +2.7V. It is similar to the ADM3311E but with two of the Receivers remain Active during Shutdown. It features an on-board, charge pump dc-to-dc converter, which eliminates the need for dual power supplies. This dc-to-dc converter also contains a voltage tripler and voltage inverter for internally generating positive and negative supplies from the power supply. It operates in Green Idle Mode, where the charge pump oscillator is gated on and off to maintain output voltage to +/-6 V, regardless of the load conditions. Another key feature is its ESD protection: up to +/−15kV on all I/O lines. The ADM3310E is available in a 28-pin TSSOP package as well as a space-saving 5×5mm 32-pin LFCSP package. APPLICATIONS Mobile phone handsets/data cables Laptop and notebook computers Printers Peripherals Modems PDAs/Hand-Held Devices/Palmtop Computers
The ADM33xxE line of driver/receiver products is designed to fully meet the EIA-232 standard while operating with a single 2.7 V to 3.6 V power supply. The devices feature an on-board charge pump dc-to-dc converter, eliminating the need for dual power supplies. This dc-to-dc converter contains a voltage tripler and a voltage inverter that internally generates positive and negative supplies from the input 3 V power supply. The dcto-dc converter operates in Green Idle mode, whereby the charge pump oscillator is gated on and off to maintain the output voltage at +-7.25 V under varying load conditions. This minimizes the power consumption and makes these products ideal for battery-powered portable devices. The ADM33xxE devices are suitable for operation in harsh electrical environments and contain ESD protection up to +-15 kV on their RS-232 lines (ADM3310E, ADM3311E, ADM3312E, and ADM3315E). The ADM3307E contains ESD protection up to +-15 kV on all I/O lines (CMOS, RS-232, EN, and SD). A shutdown facility that reduces the power consumption to 66 nW is also provided. While in shutdown, one receiver remains active (two receivers active with ADM3310E), thereby allowing monitor-ing of peripheral devices. This feature allows the device to be shut down until a peripheral device begins communication. The active receiver can alert the processor, which can then take the ADM33xxE device out of the shutdown mode. The ADM3307E contains five drivers and three receivers and is intended for mobile phone data lump cables and portable computing applications. The ADM3311E contains three drivers and five receivers and is intended for serial port applications on notebook/laptop computers. The ADM3310E is a low current version of the ADM3311E. This device also allows two receivers to be active in shutdown mode. The ADM3312E contains three drivers and three receivers and is intended for serial port applications, Pd As, mobile phone data lump cables, and other hand-held devices. The ADM3315E is a low current version of the ADM3312E, with a 22 k\Omega receiver input resistance that reduces the drive requirements of the DTE. Its main applications are Pd As, palmtop computers, and mobile phone data lump cables. The ADM33xxE devices are fabricated using CMOS technology for minimal power consumption. All parts feature a high level of over voltage protection and latch-up immunity. All ADM33xxE devices are available in a 32-lead 5 mm * 5 mm LFCSP_VQ and in a TS SOP (ADM3307E, ADM3310E, and ADM3311E in a 28-lead TSSOP; ADM3312E and ADM3315E in a 24-lead TSSOP). The ADM3311E also comes in a 28-lead SSOP. The ADM33xxE devices are ruggedized RS-232 line drivers/receivers that operate from a single supply of 2.7 V to 3.6 V. Step-up voltage converters coupled with level shifting transmitters and receivers allow RS-232 levels to be developed while operating from a single supply. Features include low power consumption, Green Idle operation, high transmission rates, and compatibility with the EU directive on electromagnetic compatibility. This EM compatibility directive includes protection against radiated and conducted interference, including high levels of electrostatic discharge. All RS-232 (and CMOS, SD, and EN for ADM3307E) inputs and outputs are protected against electrostatic discharges (up to +-15 kV). This ensures compliance with IEC 1000-4-2 requirements. These devices are ideally suited for operation in electrically harsh environments or where RS-232 cables are frequently being plugged/unplugged. They are also immune to high RF field strengths without special shielding precautions. Emissions are also controlled to within very strict limits. CMOS technology is used to keep the power dissipation to an absolute minimum, allowing maximum battery life in portable applications.

ADM3310EARU

Analog Devices

Specifications

Images

Documentation for Analog Devices ADM3310EARU

Alternate Descriptions

Title

FAQ’s

What is the product name?

What is the package type of the product?

What is the data rate of the product?

What is the number of pins of the product?

Electronic Component Search