Integrated Circuits (ICs) > AD736JR-REEL7

AD736JR-REEL7

Analog Devices

Part Number:	AD736JR-REEL7
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > AD736JR-REEL7
Qty Available:
Description:	IC AC Rms to DC Conv 5V 8-SOIC

Get Quote

04/22/2026 – There are 515 pieces pieces of Part Number AD736JR-REEL7 Available.

PCX has Analog Devices Integrated Circuits (ICs) > AD736JR-REEL7 Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

IC AC Rms to DC Conv 5V 8-SOIC

Specifications

TYPE	DESCRIPTION
Case/Package	SOIC
Contact Plating	Lead, Tin
Mount	Surface Mount
Number of Pins	8
Input Current	200 µA
Max Operating Temperature	70 °C
Min Operating Temperature	-40 °C
Nominal Supply Current	200 µA
Operating Supply Current	160 µA
Operating Supply Voltage	2.8 V
Packaging	Tape & Reel (TR)
Length	5 mm

Images

Documentation for Analog Devices AD736JR-REEL7

Datasheet	View & Download AD736JR-REEL7 Datasheet
Datasheet	View & Download AD736JR-REEL7 Datasheet
Datasheet	View & Download AD736JR-REEL7 Datasheet
Datasheet	View & Download AD736JR-REEL7 Datasheet
Datasheet	View & Download AD736JR-REEL7 Datasheet

Alternate Descriptions

Descriptions of Analog Devices AD736JR-REEL7 provided by its distributors.
IC AC RMS TO DC CONV 5V 8-SOIC
True RMS to DC Converter 8-Pin SOIC N T/R
IC,AD736JR-REEL7,TRUE RMS/DC C ONVERTER <NV
RMS to DC Converter, 1 Func, 0.005MHz, Bipolar, PDSO8
CONVERTER ICTRUERMS/DCCONVERTER
The AD736 is a low power, precision, monolithic true rms-to-dc converter. It is laser trimmed to provide a maximum error of ±0.3 mV ± 0.3% of reading with sine wave inputs. Furthermore, it maintains high accuracy while measuring a wide range of input waveforms, including variable duty-cycle pulses and triac (phase)-controlled sine waves. The low cost and small size of this converter make it suitable for upgrading the performance of non-rms precision rectifiers in many applications. Compared to these circuits, the AD736 offers higher accuracy at an equal or lower cost. The AD736 can compute the rms value of both ac and dc input voltages. It can also be operated as an ac-coupled device by adding one external capacitor. In this mode, the AD736 can resolve input signal levels of 100 μV rms or less, despite variations in temperature or supply voltage. High accuracy is also maintained for input waveforms with crest factors of 1 to 3. In addition, crest factors as high as 5 can be measured (introducing only 2.5% additional error) at the 200 mV full-scale input level. The AD736 has its own output buffer amplifier, thereby pro-viding a great deal of design flexibility. Requiring only 200 μA of power supply current, the AD736 is optimized for use in portable multimeters and other battery-powered applications. The AD736 allows the choice of two signal input terminals: a high impedance FET input (1012 Ω) that directly interfaces with High-Z input attenuators and a low impedance input (8 kΩ) that allows the measurement of 300 mV input levels while operating from the minimum power supply voltage of +2.8 V, −3.2 V. The two inputs can be used either single ended or differentially. The AD736 has a 1% reading error bandwidth that exceeds 10 kHz for the input amplitudes from 20 mV rms to 200 mV rms while consuming only 1 mW. The AD736 is available in four performance grades. The AD736J and AD736K grades are rated over the 0°C to +70°C and −20°C to +85°C commercial temperature ranges. The AD736A and AD736B grades are rated over the −40°C to +85°C industrial temperature range. The AD736 is available in three low cost, 8-lead packages: PDIP, SOIC, and CERDIP. Product Highlights The AD736 is capable of computing the average rectified value, absolute value, or true rms value of various input signals. Only one external component, an averaging capacitor, is required for the AD736 to perform true rms measurement. The low power consumption of 1 mW makes the AD736 suitable for many battery-powered applications. A high input impedance of 1012 Ω eliminates the need for an external buffer when interfacing with input attenuators. A low impedance input is available for those applications that require an input signal up to 300 mV rms operating from low power supply voltages. Data Sheet, Rev. H, 2/07

AD736JR-REEL7

Analog Devices

Specifications

Images

Documentation for Analog Devices AD736JR-REEL7

Alternate Descriptions

Title

FAQ’s

What is the product's part number?

What is the function of this product?

What is the package type for this product?

What is the operating temperature range for this product?

Electronic Component Search