Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD625JN

AD625JN

Analog Devices

Part Number:	AD625JN
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD625JN
Qty Available:
Description:	Instrumentation Amplifier, 1 Func, 200uV Offset-Max, 0.65MHz Band Width, BIPolar, PDIP16

Get Quote

04/21/2026 – There are 515 pieces pieces of Part Number AD625JN Available.

PCX has Analog Devices Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD625JN Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Instrumentation Amplifier, 1 Func, 200uV Offset-Max, 0.65MHz Band Width, BIPolar, PDIP16

Specifications

TYPE	DESCRIPTION
Case/Package	PDIP
Contact Plating	Lead, Tin
Mount	Through Hole
Number of Pins	16
Bandwidth	25 MHz
Common Mode Rejection Ratio	70 dB
Gain Bandwidth Product	25 MHz
Input Bias Current	50 nA
Input Offset Voltage (Vos)	50 µV
Max Dual Supply Voltage	18 V
Max Operating Temperature	70 °C
Min Dual Supply Voltage	6 V
Min Operating Temperature	0 °C
Number of Channels	1
Number of Elements	5
Packaging	Rail/Tube
Power Dissipation	450 mW
Resistance	1 GΩ
Slew Rate	5 V/µs

Images

Documentation for Analog Devices AD625JN

Datasheet	View & Download AD625JN Datasheet
Datasheet	View & Download AD625JN Datasheet
Datasheet	View & Download AD625JN Datasheet

Alternate Descriptions

Descriptions of Analog Devices AD625JN provided by its distributors.
Instrumentation Amplifier, 1 Func, 200uV Offset-Max, 0.65MHz Band Width, BIPolar, PDIP16
Non-RoHS Compliant e0 TIN LEAD Tube op amp buffer circuit 4.32mm 0.05muA -15V 650kHz
SP Amp INSTR Amp Single ±18V 16-Pin PDIP Tube
The AD625 is a precision instrumentation amplifier specifically designed to fulfill two major areas of application: 1) Circuits requiring nonstandard gains (i.e., gains not easily achievable with devices such as the AD524 and AD624). 2) Circuits requiring a low cost, precision software programmable gain amplifier. For low noise, high CMRR, and low drift the AD625JN is the most cost effective instrumentation amplifier solution available. An additional three resistors allow the user to set any gain from 1 to 10,000. The error contribution of the AD625JN is less than 0.05% gain error and under 5 ppm/°C gain TC; performance limitations are primarily determined by the external resistors. Common-mode rejection is independent of the feedback resistor matching. A software programmable gain amplifier (SPGA) can be configured with the addition of a CMOS multiplexer (or other switch network), and a suitable resistor network. Because the ON resistance of the switches is removed from the signal path, an AD625 based SPGA will deliver 12-bit precision, and can be programmed for any set of gains between 1 and 10,000, with completely user selected gain steps. For the highest precision the AD625C offers an input offset voltage drift of less than 0.25 µV/°C, output offset drift below 15 µV/°C, and a maximum nonlinearity of 0.001% at G = 1. All grades exhibit excellent ac performance; a 25 MHz gain bandwidth product, 5 V/µs slew rate and 15 µs settling time. The AD625 is available in three accuracy grades (A, B, C) for industrial (-40°C to +85°C) temperature range, two grades (J, K) for commercial (0°C to +70°C) temperature range, and one (S) grade rated over the extended (-55°C to +125°C) temperature range.

AD625JN

Analog Devices

Specifications

Images

Documentation for Analog Devices AD625JN

Alternate Descriptions

Title

FAQ’s

What is the part number of the product?

What is the function of the product?

What is the maximum offset voltage of the product?

What is the bandwidth of the product?

Electronic Component Search