Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD625CD

AD625CD

Analog Devices

Part Number:	AD625CD
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD625CD
Qty Available:
Description:	Instrumentation Amplifier, 1 Func, 25uV Offset-Max, 0.65MHz Band Width, BIPolar, CDIP16

Get Quote

04/21/2026 – There are 515 pieces pieces of Part Number AD625CD Available.

PCX has Analog Devices Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD625CD Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Instrumentation Amplifier, 1 Func, 25uV Offset-Max, 0.65MHz Band Width, BIPolar, CDIP16

Specifications

TYPE	DESCRIPTION
Case/Package	CDIP
Mount	Through Hole
Number of Pins	16
-3db Bandwidth	650 kHz
Bandwidth	25 MHz
Common Mode Rejection Ratio	80 dB
Gain Bandwidth Product	25 MHz
Input Bias Current	10 nA
Input Offset Voltage (Vos)	10 µV
Max Dual Supply Voltage	18 V
Max Operating Temperature	85 °C
Min Dual Supply Voltage	6 V
Min Operating Temperature	-40 °C
Nominal Supply Current	3.5 mA
Number of Amplifiers	1
Number of Channels	1
Number of Circuits	1
Number of Elements	5
Operating Supply Current	3.5 mA
Packaging	Rail/Tube
Power Dissipation	450 mW
Resistance	1 GΩ
Slew Rate	5 V/µs

Images

Documentation for Analog Devices AD625CD

Datasheet	View & Download AD625CD Datasheet
Datasheet	View & Download AD625CD Datasheet
Datasheet	View & Download AD625CD Datasheet
Datasheet	View & Download AD625CD Datasheet

Alternate Descriptions

Descriptions of Analog Devices AD625CD provided by its distributors.
Instrumentation Amplifier, 1 Func, 25uV Offset-Max, 0.65MHz Band Width, BIPolar, CDIP16
Non-RoHS Compliant e0 TIN LEAD Tube op amp amplifier circuit 20.32mm 10nA -15V 650kHz
SP Amp INSTR Amp Single ±18V 16-Pin CDIP Tube
AMP INSTRUMENTATION, DIP16, 625; No. of Amplifiers:1; Gain, Bandwidth -3dB:650kHz; Max Gain:10000; Output Type:Single Ended; Voltage, Supply Min:6V; Voltage, Supply Max:18V; Case Style:DIP; No. of Pins:16; Operating Temperature Range:-40°C to +85°C; Amplifier IC Type:Instrumentation; Bandwidth:25MHz; Base Number:625; IC Generic Number:625; Input Offset Drift, Max:1.25µV/°C; Logic Function Number:625; Max Programmable Gain:1000; Min Programmable Gain:1; Operational Amplifier Features:Instrumentation; Slew Rate:5; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Input Offset Max:25mV; Voltage, Supply +Nom:15V
The AD625 is a precision instrumentation amplifier specifically designed to fulfill two major areas of application: 1) Circuits requiring nonstandard gains (i.e., gains not easily achievable with devices such as the AD524 and AD624). 2) Circuits requiring a low cost, precision software programmable gain amplifier. For low noise, high CMRR, and low drift the AD625JN is the most cost effective instrumentation amplifier solution available. An additional three resistors allow the user to set any gain from 1 to 10,000. The error contribution of the AD625JN is less than 0.05% gain error and under 5 ppm/°C gain TC; performance limitations are primarily determined by the external resistors. Common-mode rejection is independent of the feedback resistor matching. A software programmable gain amplifier (SPGA) can be configured with the addition of a CMOS multiplexer (or other switch network), and a suitable resistor network. Because the ON resistance of the switches is removed from the signal path, an AD625 based SPGA will deliver 12-bit precision, and can be programmed for any set of gains between 1 and 10,000, with completely user selected gain steps. For the highest precision the AD625C offers an input offset voltage drift of less than 0.25 µV/°C, output offset drift below 15 µV/°C, and a maximum nonlinearity of 0.001% at G = 1. All grades exhibit excellent ac performance; a 25 MHz gain bandwidth product, 5 V/µs slew rate and 15 µs settling time. The AD625 is available in three accuracy grades (A, B, C) for industrial (-40°C to +85°C) temperature range, two grades (J, K) for commercial (0°C to +70°C) temperature range, and one (S) grade rated over the extended (-55°C to +125°C) temperature range.

AD625CD

Analog Devices

Specifications

Images

Documentation for Analog Devices AD625CD

Alternate Descriptions

Title

FAQ’s

What is the product name and description?

What is the price of the product?

Are there any alternate parts available for AD625CD?

What are the technical specifications of AD625CD?

Electronic Component Search