Integrated Circuits (ICs) > Power Management ICs > AD595AD

AD595AD

Analog Devices

Part Number:	AD595AD
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Power Management ICs > AD595AD
Qty Available:
Description:	Instrumentation Amplifier, 1 Func, 0.015MHz Band Width, BIPolar, CDIP14

Get Quote

04/22/2026 – There are 515 pieces pieces of Part Number AD595AD Available.

PCX has Analog Devices Integrated Circuits (ICs) > Power Management ICs > AD595AD Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

Instrumentation Amplifier, 1 Func, 0.015MHz Band Width, BIPolar, CDIP14

Specifications

TYPE	DESCRIPTION
Case/Package	CDIP
Contact Plating	Lead, Tin
Mount	Through Hole
Number of Pins	14
Bandwidth	15 kHz
Input Offset Voltage (Vos)	11 µV
Max Operating Temperature	125 °C
Max Supply Voltage	5.5 V
Min Operating Temperature	-55 °C
Min Supply Voltage	4.5 V
Nominal Supply Current	160 µA
Number of Amplifiers	1
Operating Supply Voltage	5 V
Output Current	5 mA
Output Type	Analog, Voltage
Output Voltage	13 V
Packaging	Bulk
Termination	Through Hole

Images

Documentation for Analog Devices AD595AD

Datasheet	View & Download AD595AD Datasheet
Datasheet	View & Download AD595AD Datasheet

Alternate Descriptions

Descriptions of Analog Devices AD595AD provided by its distributors.
Instrumentation Amplifier, 1 Func, 0.015MHz Band Width, BIPolar, CDIP14
AMP THERMOCOUPLE TYPE K, DIP14, 595; IC Output Type:Voltage; Sensing Accuracy Range:± 3°C; Temperature Sensing Range:-55°C to +125°C; Supply Current:160µA; Supply Voltage Range:5V to ± 15V; Sensor Case Style:DIP; No. of Pins:14; Amplifier Type:Thermocouple; Bandwidth:15kHz; Base Number:595; IC Generic Number:595; Input Offset Voltage Max:11µV; Logic Function Number:595; No. of Amplifiers:1; Operating Temperature Max:125°C; Operating Temperature Min:-55°C; Operating Temperature Range:-55°C to +125°C; Output Current:5mA; Output Type:Voltage; Output Voltage:13V; Output Voltage per °C:10mV/°C; Package / Case:DIP; Sensor / Transducer Type:Temperature; Supply Voltage + Nom:5V; Supply Voltage Max:15V; Supply Voltage Min:5V; Termination Type:Through Hole
The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL drive capability. The AD594/AD595 can be powered from a single ended supply (including +5 V) and by including a negative supply, temperatures below 0°C can be measured. To minimize self-heating, an unloaded AD594/AD595 will typically operate with a total supply current 160 µA, but is also capable of delivering in excess of ±5 mA to a load. The AD594 is precalibrated by laser wafer trimming to match the characteristic of type J (iron-constantan) thermocouples and the AD595 is laser trimmed for type K (chromel-alumel) inputs. The temperature transducer voltages and gain control resistors are available at the package pins so that the circuit can be recalibrated for the thermocouple types by the addition of two or three resistors. These terminals also allow more precise calibration for both thermocouple and thermometer applications. The AD594/AD595 is available in two performance grades. The C and the A versions have calibration accuracies of ±1°C and ±3°C, respectively. Both are designed to be used from 0°C to +50°C, and are available in 14-pin, hermetically sealed, side-brazed ceramic DIPs as well as low cost cerdip packages.

AD595AD

Analog Devices

Specifications

Images

Documentation for Analog Devices AD595AD

Alternate Descriptions

Title

FAQ’s

What is the part number of the product?

What is the function of the AD595AD?

What is the bandwidth of the AD595AD?

What is the package type of the AD595AD?

Electronic Component Search