Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD536AKQ

AD536AKQ

Analog Devices

Part Number:	AD536AKQ
Manufacturer:	Analog Devices
Part Type:	Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD536AKQ
Qty Available:
Description:	True RMS to DC Converter 14-Pin CDIP

Get Quote

05/19/2024 – There are 515 pieces pieces of Part Number AD536AKQ Available.

PCX has Analog Devices Integrated Circuits (ICs) > Linear ICs > Amplifiers - Op Amps, Buffer, Instrumentation > AD536AKQ Electronic Components for Sale.

Pacific Component Xchange specializes in solving challenges such as supply chain procurement, hard to find, long lead time, obsolete, cost savings, kanban and scheduled orders.

True RMS to DC Converter 14-Pin CDIP

Specifications

TYPE	DESCRIPTION
Case/Package	CDIP
Mount	Through Hole
Number of Pins	14
Max Operating Temperature	70 °C
Min Operating Temperature	0 °C
Nominal Supply Current	2 mA
Operating Supply Current	1.2 mA
Packaging	Bulk

Images

Documentation for Analog Devices AD536AKQ

Datasheet	View & Download AD536AKQ Datasheet
Datasheet	View & Download AD536AKQ Datasheet
Datasheet	View & Download AD536AKQ Datasheet
Datasheet	View & Download AD536AKQ Datasheet
Datasheet	View & Download AD536AKQ Datasheet

Alternate Descriptions

Descriptions of Analog Devices AD536AKQ provided by its distributors.
True RMS to DC Converter 14-Pin CDIP
RMS TO DC CONVERTER 0.09 MHz CDIP14
Integrated Circuit True RMS-to-DC Converter
The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater that 100 mV. An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 0.1 V to 2 V rms. The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy at 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy. The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected. The AD536A is available in two accuracy grades (J and K) for commercial temperature range (0°C to +70°C) applications, and one grade (S) rated for the -55°C to +125°C extended range. The AD536AK offers a maximum total error of ±2 mV ±0.2% of reading, while the AD536AJ and AD536AS have maximum errors of ±5 mV ±0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP or 10-pin TO-100 metal header package. The AD536AS is also available in a 20-terminal leadless hermetically sealed ceramic chip carrier. The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation. An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time. The AD536A operates equally well from split supplies or a single supply with total supply levels from 5 V to 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments. Data Sheet, Rev D, 08/2008

AD536AKQ

Analog Devices

Specifications

Images

Documentation for Analog Devices AD536AKQ

Alternate Descriptions

Title

FAQ’s

What is the product name and type?

What is the package type and number of pins?

What is the operating temperature range?

What is the supply current and supply voltage range?

Electronic Component Search