
GD25B16ET2GR – Serial NOR Flash – GigaDevice
The GigaDevice GD25B16ET2GR is a 16M-bit (2MB) 3V Serial NOR Flash memory supporting Standard, Dual, and Quad SPI with a 133MHz read clock, packaged in an 8-lead SOP (150mil). Available now for RFQ from Pacific Component Xchange.
The GigaDevice GD25B16ET2GR is a 16M-bit (2,048K-byte) Serial NOR Flash memory device from the GD25B16E “E Version” family. It supports the Standard Serial Peripheral Interface (SPI) as well as Dual SPI and Quad SPI modes, delivering high-throughput code storage and execute-in-place (XiP) operation for embedded systems. The “T” package code designates the 8-lead SOP (150mil) form factor, the “G” suffix indicates a Pb-free / halogen-free Green package, and the “R” suffix indicates tape-and-reel packing.
Built on a 3V single-supply architecture (2.7V to 3.6V) with a 4K-byte uniform sector layout (and 32K-byte / 64K-byte uniform blocks), the GD25B16ET2GR is well suited to applications that require flexible erase granularity, fast boot, and reliable non-volatile storage. With Quad I/O data transfer up to 532 Mbit/s and a 133MHz read clock (30pF load), it provides the bandwidth needed to feed SoC caches and reduce instruction-fetch latency.
Key Features
- 16M-bit (2,048K-byte) Serial NOR Flash memory
- Standard SPI, Dual SPI, and Quad SPI interfaces
- High-speed clock frequency: 133MHz for fast read (30pF load)
- Dual I/O data transfer up to 266 Mbit/s; Quad I/O up to 532 Mbit/s
- Single power supply: 2.7V to 3.6V
- 4K-byte uniform sector; 32K-byte / 64K-byte uniform blocks; 256-byte programmable page
- Page Program time 0.4ms typical; Sector Erase 45ms typical; Chip Erase 6s typical
- Allows XiP (eXecute in Place) operation with continuous read and wrap
- Advanced security: 128-bit Unique ID, 2 x 1024-byte Security Registers with OTP locks, SFDP register
- Software/hardware write protection with top/bottom block protection
- Low power: ~11uA typical standby, ~1uA typical deep power-down
- Endurance: minimum 100,000 program/erase cycles; 20-year data retention typical
- Package: 8-lead SOP (150mil), Pb-free / halogen-free Green, tape-and-reel
Applications
- Embedded code and boot storage for MCUs and SoCs
- Consumer electronics and IoT devices
- Networking and telecom equipment
- Industrial control and automation
- Wearables and portable devices
- Set-top boxes, displays, and home appliances
Why Source GD25B16ET2GR from Pacific Component Xchange
Pacific Component Xchange is an independent distributor specializing in hard-to-find, obsolete, and allocation-constrained memory. Because this specific ordering variant has limited authorized-distributor availability, our global sourcing network and authenticity-verification process help engineers and procurement teams secure the parts they need without redesign delays.
Every device is subject to our quality and counterfeit-avoidance inspection workflow, and we ship worldwide with flexible terms. Request a quote (RFQ) today for current pricing, lead time, date codes, and volume availability on the GD25B16ET2GR. Our team responds quickly to help you lock in supply for production and end-of-life builds.
Additional Information
| Manufacturer | GigaDevice Semiconductor |
|---|---|
| Component Type | Serial NOR Flash (SPI) |
| Density | 16 Mbit (2,048 KB) |
| Organization | Serial x1 / x2 / x4 I/O (Standard / Dual / Quad SPI) |
| Package | SOP-8 (150mil), Green, Tape and Reel |
| Interface / Speed | Standard/Dual/Quad SPI, 133MHz read (30pF) |
| Supply Voltage | 2.7V – 3.6V (3V single supply) |
| Sector / Page | 4KB uniform sector, 32/64KB blocks, 256-byte page |
| Endurance / Retention | 100,000 P/E cycles min; 20-year retention typ. |
| Temp Range | Industrial (per ordering grade; verify exact grade with GigaDevice) |
| Part Status | Active |
| Availability | Available |



