Toll Free 800-993-9047  |  Local 727-660-2238 ITAR Registered · ISO 9001 / AS9120 · AS6081 · ERAI Member

Shenzhen Xinluda Information Technology Co., Ltd Electronic Parts

XL9555QF24 – I/O Expander – Xinluda

Available — quote-only

Please contact us or request a quote for current pricing and availability.

or call 800-993-9047
Part Number
XL9555QF24
Manufacturer
Shenzhen Xinluda Information Technology Co., Ltd
Condition
New — trusted and guaranteed
Documentation
Full lot documentation with every shipment

Specifications

Manufacturer
Xinluda (Shenzhen Xinluda Information Technology Co., Ltd)
Component Type
16-bit I2C/SMBus I/O Expander
Number of I/O
16-bit (16 channels)
Interface
I2C-bus / SMBus
I2C Clock Frequency
400 kHz (Fast-mode)
Supply Voltage
2.3 V to 5.5 V
Addressable Devices
Up to 8 (3 hardware address pins)
Output Drive (IOH)
10 mA (recommended max)
Output Drive (IOL)
25 mA (recommended max)
Operating Supply Current (ICC)
135 uA typ / 200 uA max (5.5 V, fSCL = 100 kHz)
I/O Tolerance
5 V tolerant
Interrupt Output
Yes (open-drain, active LOW)
Operating Temperature
-40 C to +85 C
Package
QFN-24 (QFN24-4x4)
Part Status
Active
Availability
Available

About this part

The XL9555QF24 from Xinluda (Shenzhen Xinluda Information Technology Co., Ltd) is a 16-bit I2C-bus and SMBus I/O port expander that adds general-purpose parallel input/output (GPIO) to virtually any microcontroller-based system over a simple two-wire serial interface. The QF24 suffix denotes the surface-mount QFN-24 (QFN24-4×4) package. With an open-drain active-LOW interrupt output and configuration registers, the XL9555QF24 lets a host MCU monitor input transitions without continuous polling, making it well suited to designs where I/O pins are scarce.

Key Features

Applications

Why Source XL9555QF24 from Pacific Component Xchange

The XL9555QF24 has limited authorized-distributor availability, which can stall production for buyers who need it in volume or on short lead times. Pacific Component Xchange specializes in hard-to-find and allocated interface and I/O devices like this one. We provide authenticity-verified sourcing, global shipping, and responsive quoting for both prototype and production quantities. Request a quote (RFQ) for the XL9555QF24 today and our team will confirm availability, lead time, and pricing for your required quantity.

Frequently asked questions

What is the XL9555QF24?

The XL9555QF24 is Xinluda's 16-bit I2C-bus and SMBus I/O port expander with interrupt output and configuration registers, supplied in a QFN-24 package. It adds 16 general-purpose I/O lines to a host microcontroller over a two-wire serial interface.

What package is the XL9555QF24?

The QF24 suffix indicates the surface-mount QFN-24 (QFN24-4x4) package. The same XL9555 die is also offered by Xinluda in other packages such as TSSOP-24, SSOP-24, and SOP-24.

What supply voltage and interface does the XL9555QF24 use?

It operates from 2.3 V to 5.5 V and communicates over a 400 kHz fast-mode I2C-bus / SMBus interface. Its I/O ports are 5 V tolerant.

How many XL9555QF24 devices can share one I2C bus?

Up to 8 devices can be addressed on a single I2C bus using the three hardware address pins (A0, A1, A2).

What is the operating supply current of the XL9555QF24?

Per the datasheet, the operating supply current (ICC) is typically 135 uA and 200 uA maximum at 5.5 V with fSCL = 100 kHz and no load. Standby current is even lower for most pin states.

Is the XL9555QF24 available to order?

Yes. The XL9555QF24 is available through Pacific Component Xchange. Because it has limited authorized-distributor stock, it is offered on a request-for-quote (RFQ) basis so we can confirm current availability, lead time, and pricing for your quantity.

Does the XL9555QF24 have an interrupt output?

Yes. It provides an open-drain, active-LOW interrupt (INT) output that flags changes in input state, allowing the host MCU to respond to events without continuous polling.