Xinluda Information Technology Co., Ltd. Electronic Parts
Available — quote-only
Please contact us or request a quote for current pricing and availability.
The XL3232-TS from Xinluda is a low-power, multichannel RS-232 line driver/receiver designed to provide the electrical interface between an asynchronous communications controller and the serial-port connector. Integrating two drivers, two receivers, and a dual charge-pump circuit, the XL3232-TS operates from a single 3-V to 5.5-V supply, eliminating the need for the +/-12V rails traditionally required by RS-232 interfaces. It is a pin-compatible, cost-effective alternative within the widely used 3232/MAX3232 family of transceivers.
The integrated dual charge pump, combined with four small 0.1 uF external capacitors, generates the required RS-232 voltage levels from a single low-voltage supply. The device meets or exceeds the requirements of the TIA/EIA-232-F and ITU v.28 standards while drawing only 300 uA (typical) of supply current, making it well suited for power-sensitive and battery-powered designs.
Pacific Component Xchange is an independent distributor specializing in hard-to-find power-management ICs and interface components like the Xinluda XL3232-TS. Because this part has little to no authorized-distributor stock in many regions, our global sourcing network helps engineers and procurement teams secure verified, authentic inventory without redesign delays. We support obsolete and hard-to-find component sourcing, rigorous authenticity and traceability checks, and worldwide shipping. Request a quote (RFQ) today and our team will respond with current availability, lead time, and pricing for the XL3232-TS.
The XL3232-TS is a multichannel RS-232 line driver/receiver (transceiver) from Xinluda. It contains two drivers, two receivers, and an integrated dual charge pump, operating from a single 3-V to 5.5-V supply in a TSSOP-16 package.
The XL3232-TS belongs to the widely used 3232 RS-232 transceiver family and shares the same 2-driver/2-receiver architecture, single-supply 3-V to 5.5-V operation, and charge-pump design as MAX3232-class devices. Always confirm exact pinout and electrical parameters against the datasheet for your specific application before substitution.
The serial-port pins are rated to +/-15kV using the Human-Body Model (HBM), +/-8kV per IEC 61000-4-2 contact discharge, and +/-15kV per IEC 61000-4-2 air-gap discharge.
The integrated dual charge pump requires four small 0.1 uF external capacitors to generate the RS-232 voltage levels from the single low-voltage supply.
The XL3232-TS operates at data signaling rates up to 250 kbit/s, with a maximum driver output slew rate of 30 V/us.
Yes. Pacific Component Xchange specializes in hard-to-find and limited-availability components. Submit an RFQ and our team will source verified, authentic XL3232-TS inventory and provide current pricing, lead time, and global shipping options.
For:
Sending your request…
Thank you — someone will be in contact shortly.
